Style 111 | CamLock Joint Restraints | PVC Pipe | No Kit

Typically ships in 7-10 business days

Made to Order – Nonreturnable

Product Features:

• Cam-Locks are mechanical joint restraint glands with multiple independent single-tooth cam-action wedges designed to restrain a fitting on a piece of pipe.
• Application Restraining pipe ends in mechanical joint fittings.  
• Fewer wedges for time-saving installations 
• Breakaway nuts twist off at approximately 45-60 ft.-lbs. leaving cam engaged with the pipe. 
• Lower torque requirement to fully actuate bolts 
• Multi-Seal MJ Gasket available in 4-12. Fits IPS or DI sized pipe. 
• Corrosion resistant 
• Secondary hex shank for easy removal and re-installation

Style 111 Smith Blair Spec Sheet

Materials:

• GLAND 65-45-12 Ductile Iron (ASTM A536) 
• WEDGES Single Tooth Ductile Iron heat treated for Ductile Iron pipe applications
• ACTUATING BOLTS 60-40-18 Ductile Iron (ASTM A536) 
• BREAKAWAY NUTS Carbon Steel 
• FINISH Gland is Flexi-Coat Epoxy per ANSI/AWWA C213. Wedges and Actuating Bolts are E-coated Epoxy.

• A serrated restraint used for MJ type fittings. 
• Application For restraining pipe MJ fittings. 
• Recessed shoulders allow for single wrench installation 
• Compatible with standard mechanical joint and some push-on style fittings 
• Maintains full pipe deflection 
• 360 of pipe support provided – uncompromised restraint 
• Adaptable for new and/or existing pipeline applications 
• Easily installs outside the trench 
• Eliminates need for costly concrete thrust blocks

Materials:

• RESTRAINER 65-45-12 Ductile Iron (ASTM A536) 
• T-BOLTS & HEX NUTS High strength low alloy 
• CLAMPING BOLTS SAE Grade 5 ASTM A449 Type 1 or approved equivalent 
• FINISH Shop CoatA serrated restraint used for MJ type fittings. Application For restraining pipe MJ fittings. Recessed shoulders allow for single wrench installation Compatible with standard mechanical joint and some push-on style fittings Maintains full pipe deflection 360 of pipe support provided – uncompromised restraint Adaptable for new and/or existing pipeline applications Easily installs outside the trench Eliminates need for costly concrete thrust blocks Materials Specifications (subject to change) RESTRAINER 65-45-12 Ductile Iron (ASTM A536) T-BOLTS & HEX NUTS High strength low alloy CLAMPING BOLTS SAE Grade 5 ASTM A449 Type 1 or approved equivalent FINISH Shop Coat

• A serrated restraint used for MJ type fittings. 
• Application For restraining pipe MJ fittings. 
• Recessed shoulders allow for single wrench installation 
• Compatible with standard mechanical joint and some push-on style fittings 
• Maintains full pipe deflection 
• 360 of pipe support provided – uncompromised restraint 
• Adaptable for new and/or existing pipeline applications 
• Easily installs outside the trench 
• Eliminates need for costly concrete thrust blocks

Materials:

• RESTRAINER 65-45-12 Ductile Iron (ASTM A536) 
• T-BOLTS & HEX NUTS High strength low alloy 
• CLAMPING BOLTS SAE Grade 5 ASTM A449 Type 1 or approved equivalent 
• FINISH Shop Coat

• A serrated restraint used for MJ type fittings.
• Application For restraining pipe MJ fittings.
• Recessed shoulders allow for single wrench installation
• Compatible with standard mechanical joint and some push-on style fittings
• Maintains full pipe deflection
• 360 of pipe support provided – uncompromised restraint
• Adaptable for new and/or existing pipeline applications
• Easily installs outside the trench
• Eliminates need for costly concrete thrust blocks

Materials:

• RESTRAINER 65-45-12 Ductile Iron (ASTM A536)
• T-BOLTS & HEX NUTS High strength low alloy
• CLAMPING BOLTS SAE Grade 5 ASTM A449 Type 1 or approved equivalent
• FINISH Shop Coat